Persistence and Distribution of Endosulfan under Field Condition

Rapid increase in industrialization and agricultural activities to meet the population need has led to environmental pollution. The major revolution in agricultural production is mainly due to increased use of pesticides and fertilizers. Soil act as a major sink for majority of pesticides applied on agricultural crops. Among the organochlorines, endosulfan is the most commonly used pesticide, hence this study concentrates on the persistence and distribution behaviour of endosulfan under field conditions. The result showed that the alpha endosulfan concentrations were very minimum (0.98 mg/kg of soil) in all the four fields under study (Nazarath, Othikadu, Ekkadu and Ekkadukandigai of Thiruvallur district, Tamil Nadu). Where as beta endosulfan concentration at the time of application was 6.39 mg/kg and declined to 0.8 mg/kg on soil at 150th day. The endosulfan sulfate concentration was 11.8 mg/kg in soil at 15th day and then concentration declined to 2.2 mg/kg at 150th day. Field run-off samples showed maximum residue levels (0.024 mg/l) at the early irrigation period. While plant foliar parts showed maximum concentrations of α-endosulfan (43.4 mg/kg), β-endosulfan (40.6 mg/kg) and endosulfan sulfate (20.1 mg/kg). At harvest stage, rice grain and husk also had lower concentrations of endosulfan sulfate (2.2 and 0.09 mg/kg), respectively.     

Application of water quality index for groundwater quality assessment: Thirumanimuttar sub-basin, Tamilnadu, India

An attempt has been made to understand the hydrogeochemical parameters to develop water quality index in Thirumanimuttar sub-basin. A total of 148 groundwater samples were collected and analyzed for major cations and anions. The domination of cations and anions was in the order of Na>Mg>Ca>K for cations and Cl>HCO₃ >SO₄ in anions. The hydrogeochemical facies indicate alkalis (Na and K) exceed alkaline earths (Ca and Mg) and strong acids (Cl and SO₄) exceed weak acid (HCO₃). Water quality index rating was calculated to quantify overall water quality for human consumption. The PRM samples exhibit poor quality in greater percentage when compared with POM due to effective leaching of ions, over exploitation of groundwater, direct discharge of effluents and agricultural impact. The overlay of WQI with chloride and EC correspond to the same locations indicating the poor quality of groundwater in the study area. SAR, Na%, and TH were noted higher during both the seasons indicating most of the groundwater locations not suitable for irrigation purposes.     

Is seat belt usage by front seat passengers related to seat belt usage by their drivers?

INTRODUCTION: Unrestrained drivers and passengers are involved in a significant amount of fatalities and injuries in motor-vehicle crashes in the United States. While the literature documents the effectiveness of seat belt usage in reducing crash outcomes, such as fatalities and the severity of injuries, there is a need to evaluate the impact of seat belt usage by drivers and passengers in their respective vehicles. These findings could help develop effective education and enforcement strategies to enhance occupant safety. METHOD: This paper summarizes a study comparing seat belt usage rates of drivers and passengers based on whether or not the driver uses a seat belt. Observational data from 50 sites in the state of Nevada over 3 years are used for analyses. The data are stratified based on the gender of the driver and passengers in the front seat of the vehicle and are based on area type (rural or urban). RESULTS: A comparison of the rates of seat belt usage across for the aggregated data and for various types of disaggregation and statistical analyses to compare the rates of seat belt use among passengers based on the use of seat belts by drivers confirms that when drivers use seat belts, their respective passengers are much more likely to use seat belts. Further, if drivers do not use seat belts, their passengers are not likely to use seat belts. This observation is comparable for male drivers and female drivers, and also for male passengers and female passengers. Further, there are no differences for combinations of the genders of the drivers and passenger (i.e., both male or female, or one male and one female). IMPACT ON INDUSTRY: These results suggest that education and enforcement strategies would benefit most by working toward increasing seat belt usage rates among drivers.     

Simultaneous removal of Co,Cu, and Cr from water by electrocoagulation

This study provides an electrocoagulation process for the removal of metals such as cobalt, copper, and chromium from water using magnesium as anode and galvanized iron as cathode. The various parameters like pH, current density, temperature, and inter electrode distance on the removal efficiency of metals were studied. The results showed that maximum removal efficiency was achieved for cobalt, copper, and chromium with magnesium as anode and galvanized iron as cathode at a current density of 0.025?A?dm^?2 at pH 7.0. First- and second-order rate equations were applied to study adsorption kinetics. The adsorption process follows second-order kinetics model with good correlation. The Langmuir and Freundlich adsorption isotherm models were studied using the experimental data. The Langmuir adsorption isotherm favors monolayer coverage of adsorbed molecules for the adsorption of cobalt, copper, and chromium. Temperature studies showed that adsorption was endothermic and spontaneous in nature.     

Influence of transient porosity in a coupled fracture-skin-matrix system at the scale of a single fracture

Environmental Science and Pollution Research - The subsurface leaching of soluble chemicals in a fractured porous medium poses long-term risk of groundwater contamination. Tracing the occurrence,...     

Kinetic studies of adsorption of thiocyanate onto ZnCl2 activated carbon from coir pith, an agricultural solid waste

The adsorption of thiocyanate onto ZnCl₂ activated carbon developed from coir pith was investigated to assess the possible use of this adsorbent. The influence of various parameters such as agitation time, thiocyanate concentration, adsorbent dose, pH and temperature has been studied. Adsorption followed second-order rate kinetics. Two theoretical adsorption isotherms, namely, Langmuir and Freundlich were used to describe the experimental results. The Langmuir adsorption capacity (Q₀) was found to be 16.2 mg g⁻¹ of the adsorbent. The per cent adsorption was maximum in the pH range 3.0–7.0. pH effect and desorption studies showed that ion exchange and chemisorption mechanism are involved in the adsorption process. Thermodynamic parameters such as ΔG⁰, ΔH⁰ and ΔS⁰ for the adsorption were evaluated. The negative values of ΔH⁰ confirm the exothermic nature of adsorption. Effects of foreign ions on the adsorption of thiocyanate have been investigated. Removal of thiocyanate from ground water was also tested.     

Recycling of ‘waste’ FE(III)/CR(III) hydroxide for the removal of nickel from wastewater: Adsorption and equilibrium studies

Effects of Ni(II) concentration, agitation time, temperature and pH on adsorption of Ni(II) on Fe(III)/Cr(III) hydroxide, a waste by-product from fertilizer industry, have been investigated. The percent adsorption increased from 55 to 69% with increase in temperature from 20 to 40°C and from 32 to 77% with increase in pH from 3.7 to 7.5 and from 38 to 79% with decrease in Ni(II) concentration from 100 to 25 mg/L. The equilibrium data fit well with the Langmuir isotherm and the adsorption capacity was found to be 21.0 mg/g at 30°C. Thermodynamic parameters such as free energy change (ΔG°), enthalpy change (ΔH°) and entropy change (ΔS°) were evaluated. The adsorption rate constant was higher at lower concentration of Ni(II) and at higher temperature. Desorption studies show that 70% of Ni(II) can be desorbed from the adsorbent at pH 4.0. The adsorbent was tested using nickel plating industry wastewater and the maximum percent removal was 97.     

Adsorption of vanadate(V) on Fe(III)/Cr(III) hydroxide waste

Adsorption of vanadate(V) from aqueous solution onto industrial solid ‘waste’ Fe(III)/Cr(III) hydroxide was investigated. HCl treated Fe(III)/Cr(III) hydroxide was found to be more efficient for the removal of vanadate(V) compared to untreated adsorbent. The adsorption follows second-order kinetics. Langmuir and Freundlich isotherms have been studied. The Langmuir adsorption capacity (Q ₀) of the treated and untreated adsorbents was found to be 11.43 and 4.67 mg g⁻¹, respectively. Thermodynamic parameters showed that the adsorption process was spontaneous and endothermic in the temperature range 32–60°C. Maximum adsorption was found at system pH 4.0. The adsorption mechanism was predominantly ion exchange. Effect of other anions such as phosphate, selenite, molybdate, nitrate, chloride, and sulfate on adsorption of vanadium has been examined.     

Removal of direct red 12B and methylene blue from water by adsorption onto Fe (III)/Cr (III) hydroxide, an industrial solid waste

Removal of direct red 12B and methylene blue by adsorption onto Fe (III)/Cr (III) hydroxide was studied using various parameters such as agitation time, dye concentration, adsorbent dose and pH. Equilibrium adsorption data followed both Langmuir and Freundlich isotherms. Adsorption followed second-order rate kinetics. The Langmuir adsorption capacity (Qo) was found to be 5.0 and 22.8 mg dye per g of the adsorbent for direct red 12B and methylene blue, respectively. Acidic pH was favorable for the adsorption of direct red 12B and basic pH for methylene blue. Desorption studies showed that chemisorption seems to be the major mode of adsorption.     

Modelling Thiocyanate Adsorption onto Surfactant-Modified Coir Pith, an Agricultural Solid ‘Waste’

Thiocyanate (SCN⁻) is used in many industrial processes and is found in industrial wastewaters. Adsorptive removal of thiocyanate by surfactant-modified coir pith, an unwanted byproduct of coir fibre industry was studied. Cationic surfactant, hexadecyltrimethylammonium bromide was used as modifier. Optimum pH for maximum adsorption of SCN⁻ was found to be 2.0. Langmuir, Freundlich and Dubinin Radushkevich (D-R) isotherms were used to model the adsorption equilibrium data and the system followed all the three isotherms and the adsorption capacity of the adsorbent was found to be 8.6 mg g⁻¹. Kinetic studies show that the adsorption obeyed second order. Desorption studies showed that upto 90% recovery of SCN⁻ from the spent adsorbent was feasible. Effect of foreign anions on the adsorption of SCN⁻ was also examined.